# pcapmirror
![pcapmirror logo](logo/pcapmirror_logo_small.png)

pcapmirror is a command-line tool for capturing network traffic and mirroring it to a remote destination using [TZSP encapsulation](https://en.wikipedia.org/wiki/TZSP). It leverages the `libpcap` library for packet capture and provides options for filtering traffic based on BPF syntax. This tool is useful for network monitoring, intrusion detection, and remote packet analysis.

## Usage

```bash
pcapmirror [options]
```

### Options:

* -i <interface> Specify the capture interface
* -f <filter> Specify the capture filter (BPF syntax)
* -r <host/ipv4/ipv6> Specify the destination host (required)
* -p <port> Specify the destination port (default: 37008)
* -4 Force IPv4 host lookup
* -6 Force IPv6 host lookup
* -v Enable verbose mode
* -h Show this help message

### Example:

To capture traffic on the eth0 interface, filter for TCP port 80, and send it to the destination, use the following command:

```bash
sudo pcapmirror -i eth0 -f "tcp port 80" -r 192.168.1.100 -p 47008 -v
```
*Note*: Running pcapmirror typically requires root privileges due to the use of libpcap for capturing network traffic.

## Usage with wireshark

With this tool, you can mirror traffic directly to a running [Wireshark](https://www.wireshark.org/).

To avoid capturing traffic from your own monitoring machine, configure Wireshark with a capture filter of udp port 37008 or udp dst port 37008. Also, verify that your firewall permits this UDP traffic.

## Original Download Location

[https://git.freestone.net/cramer/pcapmirror](https://git.freestone.net/cramer/pcapmirror)

## Packages

On the original download location you will also find several prebuilt packages.

## Compile and Install

Compile the program:
```bash
make
```

Install the program:
```bash
make install
```

This will copy the pcapmirror executable to bin. You may need to adjust the PREFIX variable in the Makefile if you want to install it to a different location.

### Dependencies
libpcap: You need to have libpcap installed on your system. On Debian/Ubuntu systems, you can install it using:
```bash
sudo apt-get install libpcap-dev
```

On Fedora/CentOS/RHEL systems, you can install it using:
```bash
sudo yum install libpcap-devel
```
## Build debian package

If you have never built a debian package you probably need debhelper:
```bash
sudo apt-get install debhelper
```

Then build the package with this command.
```bash
dpkg-buildpackage -uc -us
```